Bushnell Elite 4200 Rifle Scope

February 3, 2010 by

For people who are looking for real value in a rifle scope, you will be hard-pressed to find a better option than the Bushnell Elite 4200 rifle scope series. These scopes are simply amazing, particularly when you judge the price at which they can be purchased. They shout “value”.

A number of the features that every shooter will be grateful for are the precise and certain windage and elevation fine-tuning knobs. These are easy to turn and adjust, particularly when re-adjusting for longer range shooting. No tools or coins are needed, simply turn the correct knob. Also, there is parallax correction from 25 yards to infinity which is handy if you are shooting at a mixture of ranges.

Hunters and tactical shooters will above all be pleased about a few of the advanced features these scopes have. Read the rest of this entry »

Picking the Right Rifle Scope

January 28, 2010 by

Most experienced hunters know that they need an excellence rifle scope to improve his hunting skill. Rifle scopes are also used by the military and law enforcement, and from time to time for trap shooting. Scopes are obtainable for crossbows, shotguns and handguns as well as for rifles. Spotting scopes are often used by golfers, hunters, and for birding. The purpose of a rifle scope is to permit the user to see further and more clearly than he would with the unaided eye. The scope magnifies the target and its surroundings. Lower quality rifles can benefit greatly when enhanced by good rifle scopes. Nikon, Leupold, Bushnell, Sightron, Aimpoint, and Burris are all manufacturers of excellence scopes. Read the rest of this entry »

Fake Leupold Rifle Scope

January 24, 2010 by

A week ago I was speaking with a fellow shooting enthusiast who surprised me with a story about knock off Leupold rifle scopes. It seems that customers were sending their Leupold scopes back to the factory for service and the factory techs were discovering that the scopes were actually very authentic looking counterfeits.

The majority of the fake rifle scopes located so far are mostly knock offs of the popular and expensive Mark 4 series, and is one of Leupold’s top sellers in the law enforcement and military markets. Since the Mark 4 series is a high end product it makes sense for the counterfeiters to produce the fake scopes and then offer them to the shooting market place at a lower than normal price. When the buyer recognizes the quality of the Leupold rifle scope brand and sees a bargain price a quick sale occurs. Leupold has investigators who have traced the fakes back to China. They have determined that most of the sales of these knock off rifle scopes begin on the internet. Additionally, it is believed that these scopes are making their way into the U.S. secondary market through unauthorized Leupold riflescope dealers, grey market and surplus goods  shipped via Europe and Canada into the United States. Read the rest of this entry »

Leupold Rifle Scopes

January 21, 2010 by

The Leupold rifle scope is clearly a great invention, and like the majority inventions it was born out of need. Most huge inventions evolve from somebody finding a need for something and figuring out how to make it work. The development of the rifle scope began when people started attaching telescopes to rifles to make the most of viewing capabilities. This idea was of course very crude and did not provide the desired outcomes. The first demonstrable use of a telescopic sight on a pistol dates back to 1834,but attempts to create a workable rifle scope were unsuccessful until 1880 when August Fielder managed to build the first telescopic sight that really actually worked. This was the predecessor of all modern day rifle scopes. In 1907 a German immigrant named Fred Leupold set up a small shop in Portland Oregon repairing survey equipment. Several years later when he met inventor John Stevens, the amazing company named Leupold and Stevens was born and still exists today. It was around 1930 after a failed hunting trip, that they began making his first Leupold rifle scopes. The small company survived World War I and the great depression but it was the Second World War that changed the company forever. Working with the US Army and Navy, the engineers at Leupold learned the secrets of waterproofing and durable construction that would change the world of optics forever. The engineers learned that by introducing nitrogen gases within the scope that the optics would remain clear, waterproof and fogproof… for a lifetime. Read the rest of this entry »

Bushnell Rifle Scopes

January 18, 2010 by

For about 50 years, the Bushnell Company has supplied hunters and shooters with a range of rifle scopes that are durable, precise and of very high quality. Bushnell rifle scopes are all covered with a warranty, even though there is very little chance that one of these waterproof, shockproof and fog-proof scopes would malfunction.

Now you do not have to be anxious about building up a layer of water vapor on your scope lens because Bushnell rifle scopes all come with a special coating on the lens. This coating allows for the beads of water to scatter in to minute droplets. Condensation on your lens or eyepiece results in the image being distorted. You also do not have to worry about breaking your Bushnell rifle scope because they are made from an aluminium alloy that is very strong. The inside of the scope is protected from outside factors because it is sealed. These scopes also do not rust easily. The manufacturers have ensured that these scopes are free from moisture by filling the inside with dry nitrogen. Read the rest of this entry »

Nikon Rifle Scopes

January 15, 2010 by

Here’s a feature over-view of rifle scopes offered by Nikon both for first time shooters as well as for avid professional hunters.

About Nikon Rifle Scopes

To purchase a product that promises quality in terms of make and usage, Nikon is a brand you can’t disregard. With technology pointing the way and a life time warranty that sets aside all fears related to purchasing a product, you may be guaranteed the best in a Nikon rifle scope. The company has a broad selection of rifle scopes in its inventory, some of which are the sovereign series, Buckmasters, Omega, and SlugHunter, ProStaff and Team Realtree scopes. These scopes come covered with Ultra Clear Coat which supplies anti-reflection features. This knocks out the need for tools to do the same thereby saving a lot of effort and time.

The Titanium series is provided with clearness and the power to tolerate rough conditions which make it excellent for big game hunting. A 44mm lens, which is adjustable, serves as a vital accessory for foggy days and low lit conditions. With no glare features and a scratch resistant matte finish, you can be sure that this is a scope to go with. The Nikon Buckmaster rifle scope series also share a few of these features and are waterproof and fog explanation.

The Nikon Monarch rifle scope series offers an African model. Equipped with a German reticle and a single tube make, you’ll be delighted on each hunting expedition.

The newly introduced Nikon Omega rifle scope is the tamer version of its source, the 3-9x forty muzzleloader scopes. This scope promises to be as impressive and spotless as the first as it contains almost all features that come with the first piece. It contains the BDC 250 Reticle, which can be adjusted for muzzleloader shots; it easily delivers what it promises.

With rifle scopes that fit each budget and liking, Nikon rifle scopes strives to introduce new pieces that fulfill varied desires and are moderately priced, in order to not be too steep or unaffordable.

For Self-Defense Look at the 9mm Versus .380 ACP

January 14, 2010 by

The .380 also know as 9mm short is not in the same performance category as the 9mm

The last fifteen years have seen serious changes in the framework within which regular American people obtain and use handguns for personal defense. On the unhelpful side the federal Crime Bill of 1994 limited magazine capacity and put new restrictions on ammunition manufacturers’ freedom to develop high-performance handgun loads. On the helpful side more and more concealed-carry laws are being enacted every year at the state level, with the total of states now allowing some form of legal civilian concealed handgun carry now standing at 47 and more are likely to join that list. The result has been significant change in the comparative market share and availability of various cartridges and handgun formats, with a large increase in the popularity of small, pocket-size autoloading pistols and an attendant incorporation of previous “duty level” cartridges into ever-smaller guns. The market for related firearm accessories and shooting supplies including stocks, grips, scopes, holsters, gun cases, sights, binoculars and cleaning equipment has also shifted.

When it comes to personal-defense carry, most people buy small guns. The single largest category of handguns bought in the US during the last 15 years has been petite, short-barrel, pocket-size protection models-autoloaders and revolvers alike. Overall, compact concealment-size handguns account for more than 70 percent of all current civilian handgun sales, and autoloaders account for approximately 75 percent of that number (according to the most current BATF statistics). In terms of caliber selection the two most popular choices within this main portion of the overall handgun pie are the .380 ACP and the 9mm.

In the present market, compact and pocket-size guns available for the 9mm and the .380 have essentially the same range of available features and performance capabilities-in fact, identical pocket-size 9mm and .380 pistol versions are increasingly available from the same manufacturer. You can choose among single-action, double-action, with the same type of sighting setups and safety-operating mechanisms, and choices of steel, aluminum, or molded-polymer frames for either cartridge. Which means the choice is really between the capabilities of the cartridges, not the guns. There is also a wide selection of firearm accessories like grips, sights and holsters to consider when making a choice. Read the rest of this entry »

TAPCO T6 Stock for Mossberg 500 Shotgun

December 22, 2009 by

There is no better home defense weapon than the Mossberg 12 gauge shotgun with the 18 inch barrel. Designed to make the weapon more ergonomic and compact, the TAPCO T6 Shotgun System provides the shooter with a six-position adjustable stock and a SAW-Style pistol grip. For added comfort, the T6 Stock also comes standard with TAPCO’s rubber buttpad. Constructed of high-strength composite, the stock is rugged enough for years of use and comes with a lifetime warranty. Works well with Mossberg 500.

Installation is a quick seven step process:

  1. Remove the old stock from the shotgun by removing the buttpad and then removing the stock screw.
  2. Line up the Tapco stock adaptor to the shotgun. Screw in the adaptor screw and washer
  3. Install the 6 position stock tube and T6 stock body into the stock adaptor. Applied pressure may be needed in order to seat the stock completely into the stock adaptor.
  4. Secure the stock tube using the 2 stock tub screws and the 2 stock tub nuts. (If installing with the sling nut use in place of one of these nuts)
  5. Install the pistol grip by lining up the hole in the grip with the hole on the side of the stock adaptor using the pistol grip screw.
  6. Fit the buttpad around the end of the stock body.
  7. Perform a safety check to ensure all parts are tightened and secure.

Mossberg 500

December 20, 2009 by


The Mossberg 500 is a shotgun manufactured by O.F. Mossberg & Sons. Rather than a single model, the 500 is really a series of widely varying hammerless, pump action repeaters, all of which share the same basic receiver and action, but differ in bore size, bar Contents, Barrel length, choke options, magazine capacity, and “furniture” (stock and forearm) materials. Other model numbers included in the 500 series are the 590, 505, and 535.

Basic features

Introduced in 1961, all model 500s are based on the same basic design. Originally using a single action bar this was changed to dual action bars in 1970, which are (at least in theory) less likely to bind than a single action bar design. A single large locking lug is used to secure the breech. The magazine tube is located below the barrel, and is screwed into the receiver. The slide release is located to the left rear of the trigger guard, and the safety is located on the upper rear of the receiver (often called a “tang safety”). Sights vary from model to model, from simple bead sight to a receiver mounted ghost ring or an integrated base for a telescopic sight. Most models come with the receiver drilled and tapped for the installation of a rear sight or a scope base. The factory scope base is attached to the barrel via a cantilever-type mount, which places the scope over the receiver but keeps it with the barrel if the barrel is removed. Read the rest of this entry »

Six Critical Steps to Gun Cleaning

December 15, 2009 by


Step 1. Always make sure the gun is unloaded and pointed in a safe direction, check it twice!

Step 2. Carefully take your gun apart, making sure you to keep track of all the pieces and parts. Please refer to your owner’s manual for detailed instructions on how to disassemble particular weapon. For most over/under shotguns, when the action is closed, you remove the forestock (wooden part where your front hand goes underneath the barrel) by pulling down on the lever on the forestock. With the forestock off, you open the action of the gun and pull up and forward on the barrels (be careful not to let the barrels fall off the gun and to the ground, the repair can be expensive). You now have three distinct pieces, the receiver (stock and trigger assembly), the barrels, and the forestock

Step 3. Clean your weapon with a solvent (such as Hoppe’s #9). Inside the barrels use a bore brush or a rod (such as Outers) with a patch with solvent applied to the patch. (preferable pushing from the breach to the front of barrels (the same direction the shot/slug travels). Then use a clean dry patch and push that patch through the barrels. Continue this alternating process using clean patches (first with solvent and then without) until the patches no longer come out dirty. Use a toothbrush with solvent to clean other metal parts of gun to remove accumulated residue/deposits/”gunk”. Read the rest of this entry »